Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Fireplace Services Across Park Slope
Fireplace service in Park Slope runs $180-$450 depending on whether we’re tuning a modern gas insert or diagnosing a century-old shared flue stack. Most appointments book within a week, and our dispatch office coordinates crews from our New York City office to reach Park Slope brownstones with the tools and camera gear these jobs actually require. Call (516) 613-3035 - a live person answers, 24 hours a day.
We’ve worked on enough Park Slope chimneys to know the pattern. Your Romanesque Revival or Queen Anne brownstone on Prospect Park West, your converted condo on 7th Avenue, your rental building near Grand Army Plaza - they all share the same anatomy. A single party-wall stack, often 3 to 4 flues, serving stacked-floor fireplaces plus a basement boiler. Original clay tiles from 1880 to 1910. Piecemeal modifications from the 1980s and 1990s renovation wave. Gas inserts dropped in with no liner. Upper floors sealed and forgotten. We’re not guessing when we arrive. We run a Level-2 camera inspection, show you the footage, and give you a plain-English verdict before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Hearthstone Chimney Co. Is Park Slope’s Preferred Fireplace Services Company
We’ve been answering the phone with a live person for over 42 years. Not a voicemail. Not a callback queue. A real person, every hour of every day. That matters in Park Slope, where co-op board deadlines don’t wait, and where a closing can hinge on a chimney inspection report delivered on time.
Our technicians are background-checked, uniformed, and carry the camera equipment and professional-grade materials - DuraFlex stainless liners, HeatShield cerfractory mortar, Famco and Copperfield caps and dampers - to complete most jobs in a single visit. No return trips for parts we should have had.
The 90-Day Done Right Promise governs every job: Krafted right, Every time, Your home first, Standing behind it. In writing. No arguing. If it’s not right, we come back. We’ve operated this way since 1984 because we plan to be serving this area in thirty more years, and that only works if our word holds.
Our Fireplace Services team has documented shared-stack separations for co-op boards on Berkeley Place, rebuilt firebox crowns on Montgomery Place, and re-lined parlor-floor gas inserts on Union Street before closing. We know the local inspectors, the common failure modes, and the difference between a cosmetic crack and a code violation that stops a sale.
Our Fireplace Services in Park Slope
Gas Fireplace Service
Park Slope’s 1980s and 1990s renovation wave left hundreds of gas log inserts running in original fireplaces with no flue liner - a configuration that fails current FDNY and DOB standards. We service, inspect, and document these installations for co-op boards and real-estate attorneys. A typical gas fireplace service in Park Slope runs $180-$280. If relining is needed to bring the flue to code, we use DuraFlex stainless steel and provide the camera documentation your board or attorney requires.
Wood Burning Fireplace
Original wood-burning fireplaces in Park Slope brownstones were designed for coal-era draft patterns and rarely meet modern EPA standards without modification. More critically, original clay flue tiles are well past their 75-100 year design life. We inspect with a Level-2 camera, assess the firebox and smoke chamber for creosote buildup or open mortar joints, and recommend only what the footage shows. A full sweep and inspection on a Park Slope wood burner runs $220-$340.
Fireplace Insert
Installing a new insert in a Park Slope brownstone is rarely a simple drop-in. The existing flue must be sized correctly for the appliance’s BTU output, and in shared party-wall stacks, the liner must be separated from adjacent flues per NYC code. We handle the full scope: firebox prep, stainless liner installation with proper insulation, termination cap, and draft testing. Fireplace insert work in Park Slope typically ranges $2,800-$4,500 depending on stack height and access.
Damper Repair
Cast-iron throat dampers in Park Slope’s original fireplaces corrode, warp, or seize after a century of use. A stuck open damper wastes heat; stuck closed, it’s a carbon monoxide hazard. We repair or replace with lock-top or Lyemance dampers as appropriate, and we check the damper’s relationship to any gas insert venting that may have been added later. Damper repair in Park Slope runs $280-$450.
Firebox Repair
The firebox in a Park Slope brownstone takes direct flame and thermal cycling on refractory brick or parged mortar that may be original to 1905. Cracked firebrick, deteriorated mortar joints, or heat-damaged parging are not cosmetic issues - they let heat reach combustible framing. We rebuild with HeatShield cerfractory mortar or full firebrick replacement as the damage warrants. Firebox repair in Park Slope typically runs $850-$1,800.
Fireplace Conversion
Converting a wood-burning fireplace to gas in Park Slope requires more than a gas line and a log set. The flue must be lined for the new appliance, the firebox must be inspected for compatibility, and in multi-unit buildings, neighbor notification may be required for shared-stack work. We coordinate the technical and regulatory aspects, document everything for your management or board, and quote upfront so there are no surprises on the bill. Conversion work in Park Slope starts around $3,200 and runs to $5,500 for complex shared-stack configurations.
Trusted Brands We Service in Park Slope
We don’t use builder-grade substitutes. Our trucks carry professional-grade materials from DuraFlex, HeatShield, Famco, and Copperfield - the brands that hold up in Park Slope’s demanding conditions. DuraFlex stainless liners handle the acidic condensate from modern gas appliances in old flues. HeatShield cerfractory mortar restores firebox integrity without a full rebuild. Famco and Copperfield caps and dampers stand up to Brooklyn’s freeze-thaw cycle and the leaf load from Park Slope’s London plane canopy. We stock common sizes and configurations locally, so most repairs don’t wait on parts.
Common Fireplace Services Problems We See in Park Slope Homes
- Shared-stack cross-drafts from abandoned upper flues. In Park Slope’s 3- to 5-story brownstones, a sealed third-floor fireplace flue often shares a party wall with an active parlor-floor gas insert. Without proper separation, basement boiler exhaust or chimney downdraft can migrate between flues. We map the stack with a camera before any service.
- Freeze-thaw spalling on century-old chimney crowns. Brooklyn’s temperatures cross 32°F dozens of times each winter. Original lime-based mortar in chimney crowns and flaunching absorbs water, freezes, and spalls. We rebuild with proper crown formulation and slope, not surface patches that fail the next winter.
- 1990s gas inserts with no liner documentation. A gas log insert dropped into an original fireplace during the 1980s or 1990s renovation wave almost certainly has no stainless liner - and no paperwork proving compliance. Co-op boards and real-estate attorneys flag this routinely. We inspect, document, and remediate to current FDNY and DOB standards.
- Chimney cap failure under leaf load. Park Slope’s dense street-tree canopy deposits heavy organic debris each fall. A missing or corroded cap lets leaves, twigs, and squirrel nesting material block the flue. We install Copperfield and Famco caps sized for the debris load and the multi-flue configuration.
Pricing for Fireplace Services in Park Slope, NY
Here’s what Fireplace Services cost in Park Slope’s market:
| Service | Typical Range |
|---|---|
| Gas fireplace tune-up and inspection | $180 - $280 |
| Wood-burning sweep and Level-2 inspection | $220 - $340 |
| Damper repair or replacement | $280 - $450 |
| Firebox repair (HeatShield or brick) | $850 - $1,800 |
| Fireplace insert with liner installation | $2,800 - $4,500 |
| Full fireplace conversion (wood to gas) | $3,200 - $5,500 |
What moves the number: stack height in a 4- or 5-story brownstone, access to the roof on Prospect Park West or a narrow rear alley, whether we’re working in a single unit or coordinating with neighbors on a shared party-wall stack, and whether the job requires FDNY or DOB documentation for a closing. We give you the full price before we start - no surprises on the bill. Senior and veteran discounts apply: 5% off any service. Call (516) 613-3035 for a free estimate.
We Also Serve Cities Near Park Slope
Our crews work throughout Brooklyn and across the water to Park Slope and nearby communities including Staten Island, Tottenville, Great Kills, and St. George. Same standards, same camera documentation, same upfront pricing. Wherever you are in our service area, the 90-Day Done Right Promise applies.
Serving Park Slope, NY - Our Local Coverage Area
We’re based in the Park Slope area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fireplace Services in Park Slope
Almost certainly yes, and you’ll need documentation proving it. NYC’s current FDNY and DOB standards require gas appliances to vent through a properly sized and listed flue liner, not original clay tile. We run a camera inspection, show you the footage, and if the flue is unlined or the clay tile is compromised, we install a DuraFlex stainless liner with full documentation for your attorney and board. Call (516) 613-3035 - estimates are free, and we understand closing timelines.
It changes everything. A single stack serving 3 to 4 flues across stacked floors means we can’t treat your fireplace in isolation. We camera-map the entire stack to verify flue separation, check for cross-drafts from abandoned upper flues, and may need to coordinate access with neighbors for roof-level work or shared smoke chamber areas. This is diagnostic archaeology, not a simple sweep. The good news: we’ve done it hundreds of times in Park Slope brownstones, and we document the shared-stack separation so your board or insurer has what they need.
Exposure and original construction. Your crown may face prevailing wind, have less overhang protection, or was built with a poorer lime-sand ratio in 1905. Brooklyn’s freeze-thaw cycle attacks any weakness relentlessly. We don’t patch spalls cosmetically - we rebuild the crown with proper slope, drip edge, and formulation so water sheds instead of soaking in. The repair lasts because the method is correct, not because the caulk is thick.
It is if the cap is missing, corroded, or poorly fitted. Leaves and organic matter block flues, hold moisture against liner walls, and provide nesting material for squirrels. In Park Slope, where London planes and oaks line nearly every block, a quality cap is essential protection. We install Famco and Copperfield caps sized for your flue configuration and the local debris load. Call (516) 613-3035 and we’ll check what you’ve got.
A Level-2 camera inspection of the full flue, firebox, smoke chamber, and damper; assessment of the chimney crown and exterior masonry for freeze-thaw damage; documentation of any gas insert or liner modifications; and a plain-English verdict with photos you can see. Nothing is recommended without camera evidence. If work is needed, we quote upfront and complete most jobs in a single visit. The 90-Day Done Right Promise covers everything in writing.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Park Slope and local communities for over 42 years.