Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Liner & Rebuild in Staten Island: What to Know First
We provide independent Olympia Chimney chimney liner and rebuild service throughout Staten Island, with most liner replacements and partial rebuilds completed in a single visit and full rebuilds scheduled within the week. Our no-hassle upfront pricing means the estimate we give is the number on the invoice, and nothing gets recommended without camera evidence you can see yourself. If the chimney’s sound, we’ll say so. If it isn’t, you’ll hear that too. This page is for Olympia Chimney owners in neighborhoods like Tottenville, Great Kills, and Westerleigh who need straight answers about liner condition, rebuild scope, and what it will actually cost. Call (516) 613-3035 to speak with a live person, any hour.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney stainless steel liner corrosion in coastal zones. The 316Ti alloy used in Olympia’s standard flex liners holds up well inland, but we’ve found accelerated crevice corrosion in Staten Island homes within a mile of the Arthur Kill or Raritan Bay, especially in the Tottenville and Charleston areas where salt air penetrates during winter inversions. We replace with upgraded 316L or 904L alloy from our DuraFlex inventory, matched to the Olympia collar and termination, and document the alloy grade on your receipt for warranty tracking.
- Olympia Chimney rigid liner joint separation in tall flues. The Olympia Rigid Series uses twist-lock collars that can back out after repeated thermal cycling in flues over 25 feet, common in the pre-war colonials of Westerleigh and Silver Lake. We find the gap with our camera, reseat with OEM collars where available, or fabricate a locking band solution from Copperfield components when Olympia backorders stretch past two weeks.
- Olympia Chimney flexible liner over-compression in offset flues. The Olympia FlexPro line is rated for 30% compression, but Staten Island’s 1920s masonry often has offsets steeper than that, particularly in Great Kills bungalows with modified fireplace openings. We measure the offset with a laser before ordering, and if the FlexPro won’t survive the bend, we spec a Gelco or DuraFlex equivalent with higher crush resistance rather than force a fit that fails in two seasons.
- Olympia Chimney terra cotta flaking behind retained liners. Some Olympia installations from the 1990s used a “drop and leave” approach where the new liner was inserted without addressing spalling terra cotta underneath. We pull the liner, photograph the host condition, and either parge with HeatShield refractory mortar for localized damage or recommend a full rebuild when the wythe is compromised. We’ve seen this exact scenario in four Staten Island homes this past year alone.
- Olympia Chimney top plate and rain cap galvanic reaction. The original Olympia galvanized top plates paired with stainless collars create a dissimilar-metal junction that corrodes aggressively where Staten Island’s freeze-thaw cycles trap moisture. We replace with Copperfield or Famco stainless top assemblies, or Gelco copper where the homeowner wants the longer service life and doesn’t mind the patina.
Our Olympia Chimney Chimney Liner & Rebuild Process
- 1
Call and schedule. A live person answers, 24 hours a day. We book a Level-2 camera inspection with photo documentation.
- 2
Inspection and verdict. Our technician runs the camera the full flue length, records video, and explains what you’re seeing in plain English. Russell Haines reviews every Olympia Chimney job personally before we quote.
- 3
Parts decision. We check Olympia Chimney OEM availability and lead times. If the part is backordered or the application calls for upgraded alloy, we present the DuraFlex, HeatShield, or Gelco equivalent with full transparency about warranty implications.
- 4
Repair execution. Background-checked, uniformed technicians complete most liner replacements and partial rebuilds in a single visit. Full rebuilds are staged across two days minimum for proper mortar cure.
- 5
Post-repair test. We run a smoke test or draft gauge verification, depending on the job, and show you the camera pass of the completed work.
- 6
Documentation and guarantee. You receive photos, the written report, and the 90-Day Done Right Promise - in writing, no arguing. If it’s not right, we come back.
What Olympia Chimney Chimney Liner & Rebuild Costs in Staten Island
These are real ranges we quote for Olympia Chimney equipment in the Staten Island market. The final number depends on flue length, access difficulty, and whether we can reuse the existing Olympia termination hardware.
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Olympia Chimney flex liner replacement (single flue) | $2,400 - $3,800 | Flue length, alloy grade, offset severity |
| Olympia Chimney rigid liner replacement | $3,200 - $4,600 | Number of sections, collar fabrication needs |
| Partial chimney rebuild (firebox to shoulder) | $4,500 - $7,200 | Scaffolding, brick matching, liner reseating |
| Full chimney rebuild with new Olympia-compatible liner | $8,500 - $14,000 | Height, crown replacement, permit requirements |
| Localized liner repair / HeatShield parging | $890 - $1,600 | Access, extent of spalling, curing time needed |
We do not quote over the phone without seeing the flue. Estimates are free, and the price we give is the price on the invoice. Call (516) 613-3035 for an exact quote.
Why Staten Island Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We’ve been answering the phone with a live person for over 42 years, and we’ve been servicing Staten Island homes, including the older masonry fireboxes in Tottenville that have seen generations of hard winters, for well over a decade. Our technicians carry Olympia Chimney, DuraFlex, HeatShield, Gelco, Famco, and Copperfield components on the truck, so we’re not waiting on a single supplier to finish your job. Every inspection ends with photos you can see and a plain-English verdict. The 90-Day Done Right Promise covers every liner and rebuild we do - in writing, no arguing. That’s a square deal: no surprises on the bill, and we’ll be there when we say.
FAQs
No. As an independent Olympia Chimney service provider, we perform repairs that preserve any remaining manufacturer warranty on materials by using OEM-spec or better components and documenting alloy grades and installation methods. We are not affiliated with or authorized by Olympia Chimney, and we do not represent their warranty department, but our documentation supports your claim if a defect arises. Call (516) 613-3035 if you have warranty paperwork you’d like us to review before we start.
Most flex liner replacements are completed in four to six hours, and rigid liner jobs in six to eight hours, assuming standard roof access and no hidden offset complications. Full rebuilds require two or more days for proper mortar curing between lifts. We’ll give you a firm schedule at estimate time, not a guess. Call (516) 613-3035 to book.
We can repair localized damage with HeatShield refractory mortar or spot-weld stainless patches when the defect is under six inches and the surrounding liner is sound. If the liner shows multiple corrosion points, joint separation, or any breach in a multi-story flue, replacement is the only code-compliant option. We show you the camera footage and explain which category you’re in before any work begins. Call (516) 613-3035 for a free inspection.
We stock DuraFlex, HeatShield, Gelco, Famco, and Copperfield liners and components that interface with Olympia Chimney terminations and collars. For true Olympia OEM parts, we check availability at estimate time and will tell you honestly if lead times are running long. In most cases, we can complete the job with equivalent or upgraded materials from our inventory without delay. Call (516) 613-3035 to confirm parts status for your specific model.
The camera tells the story. If the terra cotta flue tiles are cracked or missing but the surrounding brick wythe is solid, a liner replacement is sufficient. If the mortar joints between courses are eroded, bricks are spalling, or the chimney leans, the structure needs rebuilding before any liner will survive. We photograph everything and give you the straight answer. In Staten Island’s older housing stock, we’ve found that about one in three liner calls reveals underlying masonry damage we didn’t expect. Call (516) 613-3035 for a camera inspection and honest verdict.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Staten Island and nearby areas.