Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Cap & Crown in Staten Island: What to Know First
We provide independent Olympia Chimney chimney cap and crown service throughout Staten Island, with most jobs completed in a single visit and upfront pricing agreed before we start. A standard Olympia Chimney cap replacement runs $280-$520, while crown repair or coating typically falls between $340-$780 depending on accessibility and the condition of the underlying masonry. We’re not affiliated with Olympia Chimney - we work on their products because they show up in local homes, and we know where they tend to weaken.
This page is for Staten Island homeowners who already have an Olympia Chimney system installed and need cap or crown work done correctly the first time. If you’re seeing rust streaks on the chimney breast, water spots on the ceiling near the fireplace, or a cap that’s come loose after a nor’easter, we can sort it out. Call (516) 613-3035 - a live person answers, 24 hours a day.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney stainless single-flue caps in the 3000 series: The spot-welded seams on earlier production runs open at the corners after five to seven years of Staten Island freeze-thaw cycling. Salt air from the Arthur Kill accelerates the corrosion at the weld points. We replace with either a current-production Olympia cap with improved seam construction or a Gelco equivalent with fully hemmed edges - whichever matches your flue profile and budget.
- Olympia Chimney multi-flue caps (5000 series and similar):strong> The mesh sides on these larger units collect creosote and salt residue faster than single-flue designs, especially on homes near the South Shore with sustained bay winds. The mesh eventually corrodes through or separates from the frame. We pull the cap, assess whether the frame is salvageable, and either rebuild with Copperfield mesh replacement or source a complete new unit.
- Olympia Chimney galvanized caps on pre-2010 installations: These were common on builder-grade jobs in neighborhoods like New Dorp and Great Kills. The galvanized coating fails predictably at the drip edge, sending rust down the flue tile. We never reinstall galvanized - we upgrade to 304 stainless or copper, and we document the flue interior with camera inspection to catch any rust staining that has already begun.
- Olympia Chimney crown wash on masonry chimneys: The factory crown mix is adequate for inland climates but thin for Staten Island’s combination of driving rain and hard freeze cycles. We see vertical cracking by year four, especially on chimneys in Tottenville and Annadale that catch the full brunt of southwest storms. Our repair involves removing the compromised wash, applying a proper Portland-based sloped crown, and finishing with CrownCoat or HeatShield Cerfractory Foam where the masonry warrants it.
- Olympia Chimney chase covers on factory-built chimneys: The original aluminum chase covers dent under impact and hold water in the low spots. On homes in Westerleigh and Port Richmond with mature trees, falling branches compound the problem. We fabricate and install custom stainless chase covers with proper cross-breaks and drip edges, or source Olympia-compatible replacements when the chase dimensions are standard.
Our Olympia Chimney Chimney Cap & Crown Process
- 1
Call and schedule: A live person answers, notes your Olympia Chimney model if you know it, and books a visit. We don’t do callbacks or app queues.
- 2
Level-2 camera inspection: Before touching the cap or crown, we run a camera down the flue. You see the footage. We document any water damage, liner condition, or creosote buildup that affects what happens above the roofline.
- 3
Diagnosis and parts decision: We identify your exact Olympia Chimney series and dimensions. If OEM is available at reasonable lead time, we present that option. If not, we specify a quality aftermarket equivalent from Gelco, Copperfield, or Famco - never a big-box substitute. The choice is yours, with pricing for each.
- 4
Upfront estimate: The number we give is the number on the invoice. No surprises.
- 5
Repair or replacement: Our technician completes the cap or crown work, verifies proper clearances and draft, and photographs the finished installation for your records.
- 6
Cleanup and guarantee: We haul away the old material. Your work is covered by our 90-Day Done Right Promise - in writing, no arguing. If it’s not right, we come back.
What Olympia Chimney Chimney Cap & Crown Costs in Staten Island
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Olympia Chimney single-flue cap replacement | $280-$520 | Flue size, material (galvanized upgrade to stainless), roof pitch |
| Olympia Chimney multi-flue cap replacement | $480-$890 | Overall dimensions, mesh gauge, wind-rating requirements |
| Crown repair (crack sealing + coating) | $340-$580 | Crack extent, chimney top size, coating system used |
| Crown rebuild (remove and re-pour) | $680-$1,240 | Scaffolding needs, masonry condition, liner protection during work |
| Chase cover replacement (factory-built) | $520-$940 | Custom fabrication vs. standard size, material (aluminum to stainless upgrade) |
Steep roofs on two-story homes in areas like Emerson Hill or Todt Hill add labor time. Multiple flues or non-standard dimensions require custom work. We always price before we start. Call (516) 613-3035 for an exact quote - estimates are free.
Why Staten Island Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We’ve been answering the phone with a live person for over 42 years, and we’ve been working on Staten Island chimneys long enough to know which Olympia Chimney installations were done well and which were done cheap. Our technicians are background-checked, uniformed, and trained on the specific failure patterns of Olympia Chimney caps and crowns - not generic “chimney repair.”
When an Olympia part is backordered or discontinued, we don’t leave you waiting. We carry DuraFlex, HeatShield, Gelco, and Famco alternatives that meet or exceed the original specifications, and we install them with methods that don’t void any remaining manufacturer warranty on the flue itself. Every job ends with photos you can see and a plain-English verdict. The 90-Day Done Right Promise covers everything we touch - Krafted right, Every time, Your home first, Standing behind it.
Russell Haines and our crew have serviced older masonry fireboxes in Tottenville that have survived generations of hard winters. If the chimney’s sound, we’ll say so. If it isn’t, you’ll hear that too.
FAQs
No - manufacturer warranties on chimney components cover defects in materials and workmanship, not who performs routine maintenance or cap replacement. As an independent Olympia Chimney service provider, we use warranty-safe installation practices and document our work. If you have a valid warranty claim on the flue or liner itself, our photos and notes support your case with the manufacturer. Call (516) 613-3035 if you’d like us to review your warranty paperwork before we start.
Most single-flue cap replacements take 90 minutes to two hours from ladder set to cleanup. Multi-flue caps or crown rebuilds run three to five hours. We complete most jobs in a single visit because we stock common Olympia Chimney sizes and compatible aftermarket units. Call (516) 613-3035 to schedule - we’ll give you a firmer time estimate once we know your roofline and chimney configuration.
Cracks under 1/8 inch with no spalling or structural separation can often be sealed and coated with a refractory system like HeatShield or CrownCoat - typically $340-$580. If the crown has washed-out edges, exposed rebar, or pieces missing, removal and re-pour is the only sound option. We don’t guess - the camera inspection shows us what’s happening underneath, and we show you before recommending either path. Call (516) 613-3035 for a free assessment.
Olympia Chimney has discontinued some galvanized and early stainless lines. We measure your flue and existing mounting method, then fabricate or source a compatible replacement from Gelco, Copperfield, or Famco that matches or exceeds the original specs. The fit and finish are correct, and the materials are better than what was available fifteen years ago. Call (516) 613-3035 and we’ll confirm availability for your exact model.
Annual inspection is the standard for any chimney system in Staten Island’s climate. Salt air, freeze-thaw cycles, and the occasional tree strike mean caps and crowns take a beating. Catching a cracked crown or lifting cap early prevents the water damage that turns a $400 repair into a $2,000 rebuild. We include cap and crown condition in every Level-2 inspection - call (516) 613-3035 to book before burning season.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Staten Island and nearby areas.