Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Park Slope
Chimney cap and crown repair in Park Slope typically runs $340-$1,200 depending on whether you’re sealing surface spalling or rebuilding a century-old crown on a multi-flue brownstone stack. Most jobs are completed in a single visit after our Level 2 camera inspection, with materials sized and fabricated for your specific flue configuration. Call (516) 613-3035 to book - a live person answers, 24 hours a day.
We’ve been working on Park Slope chimneys for over 42 years. Russell Haines and our crew know the difference between a quick crown coating on a well-maintained stack and the full diagnostic archaeology that a 4-flue party-wall brownstone near Prospect Park demands. Our New York City office coordinates dispatch to Park Slope directly - no third-party scheduling, no call centers in another state.
Why Hearthstone Chimney Co. Is Park Slope’s Preferred Chimney Cap & Crown Company
Park Slope homeowners call us back because we document what we find and show it before we quote it. Our Level 2 camera inspections end with photos you can see and a plain-English verdict - documented like an engineer, explained like a craftsman. No recommendation for crown rebuild, liner replacement, or cap upgrade happens without footage you watch on our tablet.
The 90-Day Done Right Promise backs every job in writing. If it’s not right, we make it right - no paperwork to dig up, no argument about whether the problem was “pre-existing.” K.E.Y.S. values govern how we work: Krafted right, Every time, Your home first, Standing behind it.
Our technicians are background-checked and uniformed. They carry professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield - no builder-grade substitutes ordered after the fact. Most cap and crown jobs in Park Slope finish in one visit because we measure and fabricate from actual flue dimensions, not guesswork.
A live person answers every call, every hour. Not voicemail. Not a callback queue. That’s been true for over 42 years.
Our Chimney Cap & Crown Services in Park Slope
Multi-Flue Cap Installation
Park Slope’s party-wall chimney stacks typically carry 3-4 flues serving different floors and households in the same brownstone, so a cap job on one address often requires neighbor coordination and access across separate units. We size and install multi-flue caps from Gelco and Copperfield that cover the entire stack footprint, not just the flue you happen to use. This matters because single-flue caps bolted onto a 4-flue stack leave the others open to rain, leaf drop, and animal entry - and to the liability that comes with a shared stack.
Crown Repair & Rebuild
The original 1880-1910 lime-based mortar in crowns and flaunching is hammered by Brooklyn’s dozens of annual freeze-thaw crossings, making spalling and open joints the norm rather than the exception on these rooftops. We don’t slap sealant over active deterioration. Our crew removes failed material to sound substrate, then rebuilds with proper crown slope and drip edge, or coats sound-but-porous crowns with HeatShield CrownCoat after verifying the substrate isn’t actively failing. A “cap only” job on a spalling crown masks the real failure inside.
Crown Coating
When the crown surface is sound but porous - common on Park Slope brownstones where the crown was rebuilt with Portland cement sometime in the 1970s or 80s - we apply HeatShield CrownCoat, a flexible, waterproof coating formulated for chimney crowns specifically. This isn’t hardware-store brush-on sealer. It’s rated for thermal cycling and UV exposure, and we only specify it after camera inspection confirms the crown structure beneath is intact. Done right, it adds 10-15 years of service life without the cost of full rebuild.
Custom Cap Fabrication
Standard catalog caps don’t fit every Park Slope stack. We’ve fabricated custom copper and stainless caps for oversize flue clusters, offset configurations, and historic-district properties where visible roofline elements must meet LPC guidelines. Gelco and Copperfield supply the raw materials; our technicians measure, cut, and finish on-site or coordinate with local metal shops for complex geometries. The result fits once, sheds water properly, and doesn’t fight with your neighbor’s flue arrangement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Park Slope
We stock and install professional-grade caps, crowns, and coating systems from DuraFlex, HeatShield, and Gelco - brands specified by chimney professionals because they hold up to actual field conditions, not just lab testing. For Park Slope customers, this means faster turnaround: we measure your flue cluster, pull the correct cap or fabricate the custom solution, and return to install without the two-week wait for special-order parts. No builder-grade substitutes. No “this is basically the same thing.” The material on your stack matches what we specified in writing.
Common Chimney Cap & Crown Problems We See in Park Slope Homes
- Single-flue caps on multi-flue stacks. Famco or Olympia caps sized for one flue get bolted onto a 3-4 flue party-wall stack, leaving unused flues open to the mature London plane and oak leaf drop that hits every Park Slope block each fall. Water and debris enter, freeze, expand, and accelerate crown and flue deterioration that the cap was supposed to prevent.
- Freeze-thaw spalling in original lime mortar. Original lime-based flaunching on a c. 1890 crown spalls through Brooklyn’s winter cycle, water tracks down the stack, and the clay tile below is already past design life. A “cap only” job masks the real failure inside. We find this on roughly half the Park Slope inspections we run before burning season.
- Gas inserts without flue liners triggering closing deadlines. 1980s-90s gas log inserts dropped into original fireboxes without relining fail FDNY/DOB review during the condo-conversion closing, turning a simple cap call into mandatory crown and liner remediation on deadline. Real-estate attorneys call us as often as homeowners do.
- Neighbor-access complications on party-wall stacks. A cap or crown job on your unit may require roof access through a neighbor’s space, or coordination across condo boards in a single brownstone. We’ve navigated these arrangements dozens of times in Park Slope and document the access agreement in writing before work begins.
Pricing for Chimney Cap & Crown in Park Slope, NY
| Service | Typical Range in Park Slope |
|---|---|
| Single-flue cap installation (standard size) | $340-$580 |
| Multi-flue cap installation (2-4 flues) | $620-$940 |
| Custom cap fabrication and install | $890-$1,400 |
| Crown coating (sound substrate) | $480-$720 |
| Crown repair / partial rebuild | $720-$1,200 |
| Full crown rebuild with flaunching | $1,400-$2,400 |
What moves you within these ranges? Crown height and roof access difficulty on Park Slope’s four- and five-story brownstones. Number of flues and whether neighbor coordination is needed. Whether the crown substrate is sound enough to coat or must be rebuilt. Whether we find - and must address - failed clay tile or open mortar joints during inspection.
Every estimate starts with our Level 2 camera inspection, photos included. The number we quote is the number on the invoice. No surprises. Call (516) 613-3035 for a free estimate - we’ll inspect, show you the footage, and quote before any work begins.
We Also Serve Cities Near Park Slope
Our crews work throughout Brooklyn and across the water to Chimney Cap & Crown in Park Slope and surrounding communities - Staten Island, Tottenville, Great Kills, and St. George. Dispatch is coordinated from our New York City office, with local technicians carrying Park Slope-appropriate inventory for brownstone chimney configurations. If you’re in one of these nearby areas and facing similar party-wall or multi-flue stack issues, the same inspection and documentation standards apply.
Serving Park Slope, NY - Our Local Coverage Area
We’re based in the Park Slope area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Park Slope
Your brownstone was built between roughly 1880 and 1910 with a multi-flue party-wall stack serving every floor’s fireplace plus the basement boiler or furnace - a standard configuration for attached row houses of that era. Even if upper fireplaces were sealed decades ago, the flues remain active for heating equipment or passive ventilation, and they share structural support and crown protection with the flue you do use. Call (516) 613-3035 and we’ll run a camera to show you exactly which flues are open, blocked, or connected to living equipment.
The crown is the concrete or mortar slab that the cap sits on; if it’s spalling or cracked, a new cap will leak around its base within a season. We inspect both as a matter of course - no separate charge for the crown evaluation. In Park Slope, we find freeze-thaw damage in original lime crowns on roughly half our pre-winter inspections. Call (516) 613-3035 for a free estimate that covers the full stack condition.
It means the configuration fails current FDNY and DOB standards, and the title or co-op board will not clear the sale until remediation is documented. This is common in Park Slope brownstones where 1980s-90s gas inserts were dropped into original fireplaces without relining. We run the Level 2 inspection, document the condition with photos, and quote the liner and crown work if needed - typically on deadline for the closing. Call (516) 613-3035; we’ve handled these for real-estate attorneys many times.
Often yes, if the stack serves multiple units or roof access requires crossing property lines. We document the access agreement in writing before work begins and can coordinate directly with your neighbor or their contractor if preferred. Our Chimney Cap & Crown team has navigated these arrangements across Park Slope’s condo-converted brownstones. The inspection itself requires no approval; we’ll assess the stack and advise on coordination needed.
NFPA 211 recommends annual inspection for all chimneys, regardless of use, and Park Slope’s conditions make this especially prudent. Brooklyn’s freeze-thaw cycle attacks crowns and mortar year-round, and leaf debris from the neighborhood’s mature canopy accumulates regardless of whether you light fires. Gas appliances venting into the stack produce acidic condensation that deteriorates flue tile even without wood smoke. Call (516) 613-3035 to schedule - the $89 Seasonal Tune-Up includes inspection, and estimates are always free.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Park Slope and local communities since 1984.