Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Liner & Rebuild Across Staten Island
A chimney liner replacement or partial rebuild in Staten Island typically runs $2,800-$6,500 depending on flue count and access, while a full chimney rebuild on a detached home can reach $8,000-$15,000. Most liner jobs are completed in a single day. Call (516) 613-3035 to speak with a live person now - we answer 24 hours a day, 7 days a week.
We’ve been dispatching crews for Chimney Repair in Staten Island from our New York City office for over 42 years. The island’s mix of dense North Shore semi-detached Victorians and sprawling South Shore Capes means no two chimney jobs are the same. Our technicians carry the camera gear and moisture meters needed for salt-air masonry, and we price every job upfront before we start.
Why Hearthstone Chimney Co. Is Staten Island’s Preferred Chimney Liner & Rebuild Company
Staten Island homeowners know the difference between a sweep who checks a box and one who reads what the chimney actually says. We’ve built our reputation here on plain-English verdicts and photos you can see for yourself. Our 90-Day Done Right Promise is backed in writing - if it’s not right, we make it right, no paperwork and no arguing.
Calls are answered by a live person, not a voicemail tree. Our background-checked, uniformed technicians complete most liner and rebuild jobs in a single visit. And we don’t quote one number then invoice another - the estimate you approve is the number on the bill.
We know the tight rooflines of St. George, the shared stacks of Port Richmond, and the post-Sandy rebuilds of Midland Beach. That local fluency means we spot problems a generic sweep misses.
Our Chimney Liner & Rebuild Services in Staten Island
Stainless Steel Liner Installation
Stainless steel liners are our standard for Staten Island wood-burning fireplaces and our Fireplace Services in Staten Island cover oil-to-gas conversions too. We install DuraFlex and Olympia Chimney stainless systems rated for the northeast’s freeze-thaw cycles. On South Shore homes in Great Kills or Tottenville, where salt air off the Arthur Kill pits lesser metal, we spec heavier-gauge alloy and document the install with camera footage you can review. A typical stainless liner job in Staten Island runs $2,800-$4,200 for a single-flue system.
Flexible Liner for Offset Flues
Victorian and Edwardian chimneys on the North Shore - St. George, New Brighton, Stapleton - often have offset flues that won’t accept a rigid liner. We snake DuraFlex flexible liners through these offsets and seal the top with our Chimney Cap & Crown in Staten Island. The flexibility matters more here than in newer construction. Expect $3,200-$5,000 depending on length and offset complexity.
Liner Replacement
When clay tile liners crack or glaze with creosote, replacement isn’t optional - it’s a fire and carbon monoxide hazard. We remove the damaged liner, inspect the surrounding masonry with our Level-2 camera, and install a new system sized to your appliance. In shared-stack semi-detached homes, we inspect both flues even if only one side called. Cross-contamination from a neighbor’s appliance can undermine a new liner within months if the shared smoke chamber isn’t sealed. Liner replacement in Staten Island typically falls between $2,800-$5,500.
Partial Rebuild
Salt air spalls brick faces and crumbles mortar joints long before the chimney fails entirely. Our partial rebuilds target the crown, the top courses, and the flashing - the zones where Staten Island’s harbor exposure does its worst damage. We use professional-grade materials from Heatshield in Staten Island and Gelco for crown resurfacing and cap installation. A partial rebuild runs $3,500-$7,000 depending on height and scaffolding needs.
Full Chimney Rebuild
When spalling, leaning, or structural compromise runs below the roofline, we dismantle and rebuild the chimney from the foundation up. This is more common in North Shore Victorians with original multi-flue stacks that have never been relined, and in post-Sandy rebuilds where general contractors cut corners on materials. We match existing brick where possible and always install a new stainless liner as part of the scope. Full rebuilds in Staten Island range from $8,000-$15,000.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Staten Island
We stock parts and materials from DuraFlex, HeatShield, Gelco, and Olympia Chimney - brands we trust because they survive what Staten Island’s salt air throws at them. No builder-grade substitutes. When your chase cover is pitted through from harbor exposure, we don’t patch it with galvanized steel that’ll fail again in three years. We install the right material, document it, and stand behind it with our 90-Day Done Right Promise.
Common Chimney Liner & Rebuild Problems We See in Staten Island Homes
- Shared multi-flue stacks in North Shore semi-detached homes. On blocks in Port Richmond and Stapleton, two addresses vent into one brick chimney. Your new liner means nothing if your neighbor’s exhaust is dumping into the same smoke chamber. We always inspect both flues and seal the shared path.
- Post-Sandy prefab chase systems failing early. General contractors rebuilding in Midland Beach, New Dorp Beach, and Oakwood Beach in 2013-2015 often used cheaper prefab components and improper flashing. A chimney that looks new from the curb may already have active water infiltration. We bring a moisture meter on every South Shore call.
- Salt-air corrosion of crowns and chase covers. Staten Island’s position surrounded by New York Harbor, the Kill Van Kull, and the Arthur Kill exposes every chimney to salt-laden air that inland Queens or Bronx homes simply don’t face. Stainless liners pit. Galvanized caps rust through. Mortar spalls. The damage starts at the top and works down.
- Freeze-thaw cycles attacking compromised masonry. Northeast winters open hairline cracks in salt-damaged mortar, then water freezes and widens them. Annual inspections catch this before a partial rebuild becomes a full rebuild.
Pricing for Chimney Liner & Rebuild in Staten Island, NY
| Service | Typical Range in Staten Island |
|---|---|
| Stainless steel liner (single flue) | $2,800 - $4,200 |
| Flexible liner with offset | $3,200 - $5,000 |
| Liner replacement with shared-stack seal | $2,800 - $5,500 |
| Partial rebuild (crown, top courses, flashing) | $3,500 - $7,000 |
| Full chimney rebuild with new liner | $8,000 - $15,000 |
What moves the number? Height and scaffolding requirements on tight North Shore streets. Whether the flue is shared and needs cross-contamination sealing. The condition of the crown and whether HeatShield resurfacing will suffice or full rebuild is needed. And whether we’re working with original Victorian brick or a post-Sandy structure with hidden water damage.
We give you the full price before we start. No surprises on the bill. Estimates are free - call (516) 613-3035 to schedule.
We Also Serve Cities Near Staten Island
Our crews regularly cross the Verrazzano-Narrows and Outerbridge Crossing for Chimney Liner & Rebuild in Staten Island and surrounding areas. We also work in Red Hook, Brooklyn, where the same harbor salt exposure and prewar housing stock create similar liner and rebuild challenges.
Serving Staten Island, NY - Our Local Coverage Area
We’re based in the Staten Island area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Staten Island
Yes, and it’s more common than homeowners realize. On dense North Shore blocks in St. George, New Brighton, Stapleton, and Port Richmond, Victorian and Edwardian semi-detached homes often share one multi-flue brick stack between two addresses. Your flue liner can be intact while your neighbor’s exhaust leaks into the shared smoke chamber and enters your flue at the damper. We inspect both flues with our Level-2 camera and seal the shared path before installing any new liner. Call (516) 613-3035 for a free inspection - we’ll show you the footage.
Post-Sandy rebuilds in Midland Beach, New Dorp Beach, Oakwood Beach, and Great Kills were often done by general contractors using cheaper prefab chase systems and improperly flashed caps. The chimney looks new from the street but may already have active water infiltration. We always bring a moisture meter on South Shore calls, and we frequently find “young” chimneys with saturated masonry and rusted chase covers. A camera inspection reveals what’s actually happening inside. Call (516) 613-3035 - estimates are free.
Absolutely. Staten Island is encircled by New York Harbor, the Kill Van Kull, and the Arthur Kill, exposing every structure to persistent salt-laden air that Queens and the Bronx simply don’t face. Salt accelerates mortar spalling, pits stainless steel liners, and rusts galvanized chase covers at measurably faster rates. This is why we spec heavier-gauge stainless and professional-grade caps here, and why annual inspections are more critical on Staten Island than inland. Call (516) 613-3035 to schedule.
Once per year, minimum. Even occasional use produces creosote, and in Staten Island’s salt-air environment, structural damage progresses whether you light fires or not. Freeze-thaw cycles open cracks in spalled mortar. Chase covers rust through. We’ve found blocked flues and deteriorated liners in homes that hadn’t burned wood in two seasons. The National Fire Protection Association recommends annual Level-2 inspection for all chimneys, and Staten Island’s harbor exposure makes that guidance more urgent, not less. Call (516) 613-3035 to book your inspection.
Access is the first variable. On narrow blocks in Port Richmond or Stapleton, we may need specialized scaffolding or rooftop rigging to avoid damaging adjacent properties. For shared stacks, we coordinate with both homeowners to inspect and seal the entire chimney, not just one side. Our Chimney Liner & Rebuild team documents every phase with photos and a plain-English verdict. Most jobs complete in one visit. You’ll know the full scope and price before we start. Call (516) 613-3035 for a free estimate.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Staten Island since 1984.